ABC DELTA

CENTRAL HEATING - WOOD GASIFICATION BOILER PYROLYSIS PRINCIPLE

A steel hot water boiler ABC DELTA, with a heat effect of 10-20kW and 15-30kW, is intended for burning only dry wood (with up to 25% moisture). With the pyrolysis principle, firewood burns completely and therefore comes with a high efficiency rate of up to 95%.

The large firebox allows for wood lengths of up to 500mm. When the boiler is full, the burning lasts for a minimum 6 hours in the maximum mode with the possibility of extending it to an entire day if the need for heat is of a lesser extent.

The boiler can keep the glow in the furnace for up to 12 hours so there is no need to re-kindle the fire. The boiler is fully automated and is equipped with a regulator and LCD display.

delta display

The product is manufactured in accordance with the European Normative EN 303-5, it has reached far and beyond the required degree of efficiency and satisfaction is up to all standards in terms of the emissions of any harmful substances from the exhaust gases into the atmosphere.

The boiler is equipped with an oxygen sensor (lambda) which provides, a constant reading percentage of oxygen in the exhaust gas, engines for automatic control of primary and secondary draft. There is thermal protection in the form of copper coils with an obligatory installation of a thermostatic valve.It is essential to be installed on the central heating system through one or more accumulators of hot water (a buffer).It is recommended that for each 1kW of boiler power to have at least 50 litres of water (eg. for a boiler of 30kW, 1500 litres of water is needed). The guarantee on the mechanical components is 5 years and for the electrical components and for the chamotte bricks 2 years.

delta

The product is manufactured in accordance with the European Normative EN 303-5, it has reached far and beyond the required degree of efficiency and satisfaction is up to all standards in terms of the emissions of any harmful substances from the exhaust gases into the atmosphere.

The boiler is equipped with an oxygen sensor (lambda) which provides, a constant reading percentage of oxygen in the exhaust gas, engines for automatic control of primary and secondary draft. There is thermal protection in the form of copper coils with an obligatory installation of a thermostatic valve.It is essential to be installed on the central heating system through one or more accumulators of hot water (a buffer).It is recommended that for each 1kW of boiler power to have at least 50 litres of water (eg. for a boiler of 30kW, 1500 litres of water is needed). The guarantee on the mechanical components is 5 years and for the electrical components and for the chamotte bricks 2 years.

delta 2

BASIC SPECIFICATIONS

  • Dimensions (H x W x D)
    1395 x 640 x 1080 mm

  • Efficiency
    92,3 %

  • Weight
    510 kg

  • Flue diameter
    150 mm

  • Max. working temperature
    85 °C

  • Size of wood for fuel
    500 x 100 x 100 mm

  • Necessary draught
    10 Pa

  • Boiler volume
    100 l

  • Power
    20 kW